Free cheat sheets

Precalculus / Chapter 10

Parametric Functions

Cheat sheet

Parametric Functions

  • Parametric position uses the same parameter in x=f(t)x=f(t) and y=g(t)y=g(t). For x=2t+1x=2t+1, y=t2y=t^2, at t=2t=2 the point is (5,4)(5,4).
  • Eliminating t gives y=((x−1)/2)2y=((x-1)/2)^2, but retain the original t-range and traversal direction. If 0≤t≤20\le t\le2, only 1≤x≤51\le x\le5 is traced; the whole parabola is not covered.

Parametric Functions Modeling Planar Motion

  • A no-drag projectile with upward-positive y follows x=x0+vxtx=x_0+v_xt and y=y0+vy0t−12gt2y=y_0+v_{y0}t-\tfrac12gt^2, with constant downward acceleration magnitude g. Components share time; x-position alone does not determine height without that common time.
  • For x=3tx=3t, y=8t−2t2y=8t-2t^2, the height is 8−2(t−2)28-2(t-2)^2. The peak is (6,8)(6,8) at t=2t=2; return to ground occurs at t=4t=4, giving horizontal displacement 12. Restrict the physical flight to 0≤t≤40\le t\le4.

Parametric Functions and Rates of Change

  • Average component velocities are Δx/Δt\Delta x/\Delta t and Δy/Δt\Delta y/\Delta t. The secant path slope is Δy/Δx\Delta y/\Delta x when Δx≠0\Delta x\ne0; it has different units and meaning.
  • From (1,2)(1,2) to (7,5)(7,5) in 2 seconds, average velocity is ⟨3,1.5⟩\langle3,1.5\rangle units/s and path secant slope is 1/21/2. Endpoint averages can hide reversals or curved motion between the endpoints.
  • Direction comes from how coordinates change as t increases, not their signs. A point with positive x can still move left. An instantaneous claim needs more information than an endpoint average.

Parametrically Defined Circles and Lines

  • A line segment from A to B is r(t)=A+t(B−A)\mathbf r(t)=A+t(B-A) for 0≤t≤10\le t\le1. From (1,2)(1,2) to (5,0)(5,0), use x=1+4tx=1+4t, y=2−2ty=2-2t.
  • A circle of radius R, center (h,k)(h,k) and period T can use x=h+Rcos⁡(2πt/T)x=h+R\cos(2\pi t/T), y=k+Rsin⁡(2πt/T)y=k+R\sin(2\pi t/T). It starts at the rightmost point and travels counterclockwise; reversing the sine sign reverses direction.
  • For x=1+2cos⁡tx=1+2\cos t, y=−3+2sin⁡ty=-3+2\sin t, center is (1,−3)(1,-3), radius 2 and period 2π2\pi in the input units. Offsets move the center, not the radius.

Implicitly Defined Functions

  • An implicit relation such as x2+y2=9x^2+y^2=9 need not define one output y for every x. At x=0x=0, both y=3y=3 and y=−3y=-3 satisfy it.
  • Choosing the upper branch gives y=9−x2y=\sqrt{9-x^2} with domain [−3,3][-3,3] and range [0,3][0,3]. The lower branch has the negative square root. Keep the branch fixed when measuring change.
  • On the upper branch from x=0 to x=3, average rate is (0−3)/(3−0)=−1(0-3)/(3-0)=-1. That is a finite-interval slope, not the slope at every point on the arc.

Conic Sections

  • A circle has (x−h)2+(y−k)2=R2(x-h)^2+(y-k)^2=R^2. Completing squares in x2+y2−4x+6y=3x^2+y^2-4x+6y=3 gives (x−2)2+(y+3)2=16(x-2)^2+(y+3)^2=16, so center is (2,−3)(2,-3) and radius 4.
  • A vertical parabola (x−h)2=4p(y−k)(x-h)^2=4p(y-k) has vertex (h,k)(h,k), focus (h,k+p)(h,k+p) and directrix y=k−py=k-p, with p≠0p\ne0. Swap x and y for a horizontal parabola; p’s sign determines its opening direction.
  • A horizontal ellipse (x−h)2a2+(y−k)2b2=1\frac{(x-h)^2}{a^2}+\frac{(y-k)^2}{b^2}=1, with a>b>0a>b>0, has vertices (h±a,k)(h\pm a,k) and foci (h±c,k)(h\pm c,k) where c2=a2−b2c^2=a^2-b^2. The sum of distances to the foci is 2a2a.
  • A horizontal hyperbola (x−h)2a2−(y−k)2b2=1\frac{(x-h)^2}{a^2}-\frac{(y-k)^2}{b^2}=1 has vertices (h±a,k)(h\pm a,k), c2=a2+b2c^2=a^2+b^2, and asymptotes y−k=±(b/a)(x−h)y-k=\pm(b/a)(x-h). The absolute difference of focus distances is 2a2a. The positive squared term identifies the opening axis.

Parametrization of Implicitly Defined Functions

  • To parametrize a graph y=f(x)y=f(x), one choice is x=tx=t, y=f(t)y=f(t) with its domain retained. Check both substitution into the equation and coverage of the intended path.
  • For the ellipse (x−h)2a2+(y−k)2b2=1\frac{(x-h)^2}{a^2}+\frac{(y-k)^2}{b^2}=1, use x=h+acos⁡tx=h+a\cos t, y=k+bsin⁡ty=k+b\sin t over a full turn. Substitution reduces to cos⁡2t+sin⁡2t=1\cos^2t+\sin^2t=1.
  • The parametrization x=t2x=t^2, y=t4y=t^4 satisfies y=x2y=x^2 but reaches only x≥0x\ge0. Replacing t by -t reverses a suitable traversal; it does not automatically repair missing coverage.

Sign in